Strobies Pro-Flash 180 Flash Head

Strobies Pro-Flash 180Ws Flash Head

A high-powered and versatile bare bulb flash unit for use with the STR202 battery pack

$249.99

In stock

Product Description

The Strobies Pro-Flash 180 offers the same portability as your speedlight, with more than twice the power. The Pro-Flash gives you precise manual control with a 8-stop range adjustable in 1/3-stop increments, and features a 270° rotating head with 90° tilt capability.

The Pro-Flash 180 boasts a full-power recycling time of two seconds, and a flash duration of up to 1/10,000 second. Five different flash modes give you the ability to fine-tune your light output in any situation. Your basic Manual mode lets you control the power in 1/3-stop increments. S1 mode activates the optical slave and lets you trigger the Pro-Flash using another flash source. S2 mode also uses the optical slave, but will ignore the first pre-flash often-used in red-eye reduction flash modes. RPT mode (repeat) allows you to use your Pro-Flash as a Stroboscopic Flash for creative “stop motion” photography. High-Speed Sync mode lets you to use your Pro-Flash at shutter speeds greater than 1/250sec., allowing you to properly expose for bright daylight while illuminating your subject. (High-Speed Sync is only available when used with a capable trigger).

The Strobies Pro-Flash is compatible with an array of available accessories including umbrellas, snoots, beauty dish, honeycomb grid and more.

The Pro-Flash 180 can be mounted directly to your on-camera hot shoe and used as a standard speedlight. It can also be used off-camera with several different triggering options. Pro-Flash can be triggered via optical slave, sync port or the Strobies Pro-Flash Transmitter/Receiver Kit.

The simplified controls, large LCD display, MF-Assist Beam, Audio Ready function, and many other features make the Strobies Pro-Flash extremely easy to use, allowing you to quickly set up and get your shot.

This kit is designed to serve as an additional or replacement flash head, and is powered by the Strobies Pro-Flash Battery Pack (not included).

Additional Information

Maximum Wattssecond

180Ws

Guide Number

60m (196')

Recycle Time Full Power

2.5 Seconds

Color Temperature

5600K

Variable Power

Full to 1/128 power

Power Range

8 stops, 1/3 stop increments

Sync Mode

Manual, Stroboscopic, High Speed Sync (up to 1/8000 sec w/HSS trigger)

Multi Flash Stroboscopic

Up to 100 flashes, 199Hz

Auto Focus Assist Beam

Manual

Fitting Type

Pro-Flash, Quantum®, Lumdyne®

Triggering

Pro-Flash Transmitter/Receiver (sold separately), sync cable, optical slave, third-party flash trigger

Flash Ready Indicator

LED and switchable audible

Auto Power Dump

Yes

Vertical Rotation Angle

-15 to 90º

Horizontal Rotation Angle

0 to 270º

Replacement Flash Tube

180Ws Pro-Flash Replacement Flash Tube – STR234

Cable Length

1.8m (6') – Coiled

Power Supply

Strobies Pro-Flash Battery Pack – STR202 – NOT INCLUDED

Reflector Diameter

11.4cm (4.5")

Construction

Polycarbonate

Dimensions

21 x 9 x 7cm (8.2 x 3.5 x 2.5") – without flash tube or reflector

Weight

0.5kg (1.2lb)

The Strobies Pro-Flash 180 Flash Head includes:

Reviews

There are no reviews yet.

Be the first to review “Strobies Pro-Flash 180 Flash Head”

Your email address will not be published. Required fields are marked *

x
Strobies Pro-Flash 180Ws Flash Head

Thanks for shopping for Strobies Pro-Flash 180 Flash Head!

Interfit suggests the products listed below to make a really great kit.

©2017 Interfit Photographic Ltd

Log in with your credentials

or    

Forgot your details?

Create Account