This Beauty Dish is a part of the Portrait kit STR100.

The Beauty dish will give a soft uniform light source, ideal when combined with a reflector or other Strobies products to add a fill light. Using the Beauty dish in iTTL or eTTL flash mode requires no adjustment to your exposure systems.

You can use the Beauty dish as a reflector by removing the central disk to create a hard or long though light source.

When purchasing this item please note that a Flex Mount is not included

This Globe difuser is a part of the Portrait kit STR100.

The globe difuser offers a soft uniform light source and is ideal for large group shots for mobile, wedding and portrait photographers Using the globe difuser in iTTL or eTTL flash mode generally does not need any adjustment to your exposure systems.

When using the Globe behind a model you could add a colour gel to the back of the globe This will then provide a hair light and a colour wash to your background, this enables you to be more economical with your lighting system.

When purchasing this item please note that a Flex Mount is not included

This softbox is a part of the Portrait kit STR100.

The softbox will give a soft uniform light source and is ideal when combined with a reflector or other Strobies products to add a fill light. Using the softbox in iTTL or eTTL flash mode requires no adjustment to your exposure systems.

The softbox is easy to put together by following the simple instructions below.

Flex Mount Softbox Mounting holes.

On each edge of the Flex mount you will see 4 holes for mounting a Strobies softbox,(as shown with the rods inserted). It is best to erect the softbox without the flex mount being on the flashgun to prevent any damage to the Flash gun or the material of the softbox.

When purchasing this item please note that a Flex Mount is not included

This Barndoor set Dish is a part of the Portrait kit STR100.

The Barndoor will give a soft uniform light source and is ideal when combined with a reflector or other Strobies products to add a fill light.

Barndoor's are generally used as a hair light or a fill light on the background.

When purchasing this item please note that a Flex Mount is not included

This Snoot is a part of the Portrait kit STR100 and STR101.

The snoot will give a soft uniform light source and is ideal when combined with a reflector or other Strobies products to add a fill light.

The snoot is generally used to create a spot light on a subject, it is ideal for Product photography and portraits, each snoot comes with 2 x honeycombs that simple push fit on the end of the snoot.

When purchasing this item please note that a Flex Mount is not included

The Honeycomb 20 Degree is a part of the Portrait kit STR100 and STR101.

The Honeycomb 20 Degree will give a soft uniform light source and is ideal when combined with a reflector or other Strobies products to add a fill light.

The Honeycomb is a versatile tool for photographers who like to create a stylized lighting set up, it can be used to add a fill light on the side of the face or to provide you background lighting.

When purchasing this item please note that a Flex Mount is not included

The Honeycomb 30 Degree is a part of the Portrait kit STR101.

The Honeycomb 30 Degree will give a soft uniform light source and is ideal when combined with a reflector or other Strobies products to add a fill light.

The Honeycomb is a versatile tool for photographers who like to create a stylized lighting set up, it can be used to add a fill light on the side of the face or to provide you background lighting.

When purchasing this item please note that a Flex Mount is not included

This large difuser is ideal for using as a soft light source when using your flashgun, by increasing the soft light area the small hotshoe gun will provide a softer light on your subject.

Easy to fold and store in your kit bag and fits most standard and zoom lens up to a 90mm it simple pushes over the lens.

You will quickly realize the benefits of this difuser, which is ideal when going on holiday or traveling as it does not take up much space, its easy to wipe clean .

This is the smaller version of the STR110 which is ideal for use with your on board cameras flash or with a small to medium sized flash guns.

Easy to fold and store in your kit bag and fits most standard and zoom lens up to a 90mm it simple pushes over the lens.

You will quickly realize the benefits of this difuser, which is ideal when going on holiday or traveling as it does not take up much space, its easy to wipe clean .

These disc type reflectors are the ideal reflectors when your main light source is from behind the subject, having a round reflector will give a pleasing round catch light in the eye.

Available in two sizes 30 cm (12") or 58cm (22") they simple push over the lens and can be easily folded to keep in your kit bag. Invaluable on travel or holidays or even for wedding and portrait photographers .

The use of a lens hood is recommended to stop flare entering the lens with light from behind.

Sony/Minolta cameras do not have a standard Hotshoe on the top of the camera.

This means you will not be able to fit many useful accessories like standard Infrared triggers, radio triggers etc so you will need one of these to enable their use.

Most of the Sony / Minolta range of cameras also do not have a P.C.Sync cable socket, so we have built one in to the STR114 adaptor to enable you to use this with Interfit Studio lighting kits such as the EX150 MKII kits.

Standard Hotshoe Adaptor to fit on the top of the camera hotshoe.

The standard hotshoe adaptor is used when you do not have a P.C.Sync on your camera, this is to enable you to use the standard cables that come with Interfit Flash kits allowing you to connect between the head and the camera.

Only one Sync cable is required as the other flash unit will pick up the infra red sync cell enabling both unit to work together.

Turn your lighting stand into a hotshoe flash gun holder. it simply fits all good lighting stands like the Interfit COR750,751,752,753,753 via the screw thread.

This Hotshoe also has a P.C. Sync socket for Radio transmitter connections to the bottom of the flash gun.

Add an additional hotshoe flash gun to an INT273 Reflector arm kit to enable you to create a reflected light source which will be softer than when compared to the flash gun being placed directly in front of your subject. Picture here shows the flexi arm clamped on to the Light stand of the 5 in 1 reflector arm kit INT273.

The clamp can also be used on a door or bookcase, the flexi arm is 30 cm (12") and the jaws can be used up to 35mm (1½")

The kit features everything you need to meet your creative approach to lighting indoors or outdoors. With 2 high quality light stands and brackets your hotshoe flash gun can be put though its paces with the umbrellas provided to achieve high quality lighting on the fly. This STROBIES kit can be easily stored in the kit bag and ready to use in no time, With the two 36 " umbrellas your flash guns will achieve a greater distribution of light on your subject then when compared to using the flash guns without any other modifiers.

These 22" disc type reflectors are the ideal when your main light source is behind the subject, having a round reflector will give a pleasing round catch light in the eye.

Available in two sizes 30 cm (12") or 58cm (22") they simple push over the lens and can be easily folded to keep in your kit bag. Invaluable on travel or holidays or even for wedding and portrait photographers .

The use of a lens hood is recommended to stop flare entering the lens with light from behind.

The Nikon Delta remote is a hotshoe fitting radio shutter release with LED confirmation for Auto Focus, Single / Bulb or Continuous frame rate operations.

Ideal for sport or wildlife photographers to enable the camera to be placed in a remote location and operated up to 100 mtrs (320 feet) away from the camera.

For use with the following cameras via the included cables.

The STR123 can be used with Nikon, Kodak & Fuji cameras with the included cables including the following cameras:

Nikon   D70s / D80
Nikon   N90s / F5 /F6/ F100 /F90 F90x
Nikon   D1 / D1h / D1 x / D2h/ D2x/ D2hs/ D2xs/ D3 /D3s / D200 /D300 / D300s / D700
Kodak DSC-14n
Fuji      S3 Pro / S5 Pro
Nikon   D90/ D5000

Download operating instructions here

The Canon Delta remote is a hotshoe fitting radio shutter release with LED confirmation for Auto Focus, Single / Bulb or Continuous frame rate operations.

Ideal for sport or wildlife photographers to enable the camera to be placed in a remote location and operated up to 100 mtrs (320 feet) away from the camera.

For use with the following cameras via the included cables.

The STR124 can be used with Canon cameras with the included cables including the following cameras:

Canon EOS 30/ 33 / 50 / 300 / 300d / 350d / 400d / 450d / 500d / 1000d
Canon Rebel XS / Rebel / Rebel XT / Rebel XTI / Rebel XSI / Rebel T1I
Canon EOS 1v3 / 1ds / 1ds mk ii mk iii /1ds mk iii
Canon 10d / 20d / 30d / 40d /50d /5d /5dmkII

Download operating instructions here

The I Sync 4 has 4 independent radio channels for use where multiple photographers may be using wireless triggers such as at a wedding etc. Now you can set the channel and still keep on shooting without interference from other photographers.

A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering.

• Optical triggering is similar to your in built sync cell on your studio flash heads and can allow a greater distance to be used when using Infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells.

• Wireless triggering when used with the radio trigger on your camera allows out of sight flash triggering or around walls and most obstacles up to a maximum distance of 30 mtrs (100 feet).

Each receiver has a built in light stand tread on the bottom to allow your speedlite to be stand mounted. In addition a PC sync cable and socket is included along with a mono jack converter to fit both large and small jack sync sockets for connecting to studio lighting. Runs on long life lithium batteries (included).

The I Sync 4 has 4 independent radio channels for use where multiple photographers may be using wireless triggers such as at a wedding etc. Now you can set the channel and still keep on shooting without interference from other photographers.

A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering.

• Optical triggering is similar to your in built sync cell on your studio flash heads and can allow a greater distance to be used when using Infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells.

• Wireless triggering when used with the radio trigger in this kit on your camera allows out of sight flash triggering or around walls and most obstacles up to a maximum distance of 30 mtrs (100 feet).

Each receiver has a built in light stand tread on the bottom to allow your speedlite to be stand mounted. In addition a PC sync cable and socket is included along with a mono jack converter to fit both large and small jack sync sockets for connecting to studio lighting. Runs on long life lithium batteries (included).

Using an innovative pin configuration the Multi-fit TTL cord can be used with Nikon, Fuji and Canon cameras when used with manufacturer’s flashguns.

The TTL cord allows you to maintain a link to your flashgun for lighting off camera.

The cord is 740mm (29”) when folded and can be used up to 2 mtrs (6 feet) away with a screw thread built in it can be mounted on to a light stand to hold your flashgun.

In addition you can fire two flashguns on the same cord in manual mode.

Using an innovative pin configuration the Multi-fit TTL cord can be used with Nikon, Fuji and Canon cameras when used with manufacturer’s flashguns.

The TTL cord allows you to maintain a link to your flashgun for lighting off camera.

The cord is 10m (32') Ideal for using a secondary flashgun connected to your camera as a master unit to control your Remote units at a greater distance with a screw thread built in it can be mounted on to a light stand to hold your flashgun.

In addition you can fire two flashguns on the same cord in manual mode.

This Beauty Dish adaptor kits is designed to be used with the INT334 bracket with the softbox removed. The kit includes the 30cm (12") Beauty dish and an adaptor ring to enable it to fit over the 15cm (6") ring of the bracket.

Can be used with other manufacturers products of a similar design with a 15cm aperture ring.

Ideal for using above the subject and used in conjunction with the INT333 Boom arm VAL/VAB.

The Strobies Boom Arm allows an assistant to hold your lighting above the subject. Each Arm has a padded grip and a cover at the base for a comfortable and strong grip. The arm has 3 telescopic joints for extended use above the subject. Ideal for use with Strobies XS brackets, Triple Flash Brackets, Strobies Pop up Softboxes, Strobies Radio sets with Strobies accessories attached such as a softbox or beauty dish.

The STROBIES folding softbox is ideal for mobile photographers wanting a quick and portable solution to studio lighting on the move. Simply fit your flashgun into the provided shoe with the head inserted inside the softbox to provide a softer quality of light. Ideal for wedding and event or outdoor photographers. Each Kit is supplied with a ball bracket to allow the softbox to be tilted in multiple directions, and a handy all in one kit bag for simple storage of the kit. Fits directly on to a standard light stand such as a COR750 or COR751 or can be used with the new Strobies Boom Arm INT333 for over head lighting and combined with a reflector to create beautiful quality portraits.

In addition a SB900 shoe is included within the kit to allow the use of the Nikon SB900 speedlite which does not have a standard foot.

Please note some flashguns such as large headed units like the Vivitar 285 do not fit inside the opening and should not be used, here we recommend using a Flex Mount and the Strobies Softbox (STR104 ) as an alternative.

The STROBIES Triple flash bracket has been designed with ease of use in mind, in a compact yet strong and versatile kit, ideal for the mobile studio set ups for all sports, wedding or event, and portrait photographers. The bracket has 3 flash shoe mounts and a tilt handle to enable the perfect positioning of your lighting. this will be of interest to Sports photographers when using an additional INT333 Strobies boom arm you can have an assistant follow the action whilst panning high actions images, wedding photographers can hold the lighting high above a group to remove shadows in the background. Event Photographers can use the bracket to obtain control in smaller location shoots where mains power may not be available.

Ideal for mounting flashguns on to doors, cupboards or other locations when a lighting stand is not possible to use.

The jaws open to grip most shapes including round metal bars or a door frame up to a maximum size of 4 cm (1½") a removable block allows the pro clamp to grip a metal bar.

Ideal for mounting hotshoe flashguns on to light stands. This hotshoe and strobe radio trigger set can be used for both applications and trigger most hotshoe units and all Interfit strobes.

Hotshoe flash guns can be mounted directly on to the built in hotshoe which also provides the triggering power to the flashgun, whilst studio strobes are connected via the provided P.C.Sync terminal on the side of the receiver.

With the additional use of 4 channels to choose from you can use it when other photographers are using radio transmitters but still be able to control your units independently from the other photographers. The unit is powered by long life batteries and works on 433MHz at a distance of up to 30m (100 feet) in an open area.

This product will not work with INT412 due to variances in frequencies.

Ideal for adding an additional receiver to other flashguns or strobes when using Infrared sync cells would not be of use over long distances or in daylight conditions.

By adding the receiver to another flash on the same channel you can control your lighting to the full. Identical to the receiver in the INT492 trigger set except without the transmitter. Supplied with P.C.Sync cable and batteries.

This product will not work with INT412 due to variances in frequencies.

Ideal for holding large or small Interfit muslin backgrounds for the photographer on the move, the telescopic pole can be adjusted to allow the background support system to be made narrower when space is not available to the photographer.

Supplied with:

2 x stands

1 x telescopic cross pole

1 x bag

Ideal for mounting paper or vinyl rolls for the mobile studio photographer where a standard background support system would not be practical.The auto pole set simple push fits between the floor and ceiling being locked into place by the vertical bars of the kit. The background rolls are held in place via the expan clamps which feed into the standard tubes of the background. The kits is able to hold up to three rolls at any one time allowing a quick and convenient change over of colour's to be used.

Supplier with: 2 x auto poles, 2 x hanger systems, 2 x brake expan's 2 x chain and weights.