Interfit Home Studio EXD200

Flash
The EXD200 is lightweight and stylish yet very robust, and it is designed specifically for 21st century photographers on the move. The 5 volts Sync voltage makes them highly suitable for use with all current digital and film cameras. Touch button controls allow the desired power levels and functions to be quickly set. The EXD can also overcome the problem caused by cameras that send out a pre flash before exposure, a simple press of the touch button controls tells the EXD to ignore any pre flash. Accurate power adjustment in one tenth of an f-stop increments over a 4 f-stop range and a high guide number of 45 (135ft) ensure the exact amount of light required. A built in Infra red slave cell allows freedom in the studio when used with the Interfit IRX transmitter. (INT411)
EXD200 Head
EXD200 Controls
EXD200 bag
Item no Power
Item No : INT118 200 W/s
Head + Reflector + Bulb + Sync & Power cables
Kit No : INT119 Umbrella/Softbox kit with bag
Replacement Bulb no's Watts
EXD200 bag
Bulb No : INT515 60 watt Halogen    
Flash features at a glance:
Adjustable over 4 f-stops
5 volt Sync voltage
Easy to use Touch button controls
Rubberized finish
1/10th f~stop adjustment
Halogen modelling lamps
User changeable flash tubes
Built in infrared and flash sensitive slave cell
Special Pre-flash Monitor Program (see below)
Audible and visual recharge indicators.
Auto Power Dumping on flash discharge
All in kit bag included in (kit INT119)

Specification:
Model EXD200
Kit Contents

2 x EXD200 heads,

2 x Air-damped stands (COR750)

1 x Softbox 60x60 cm(24x24")

1 x Translucent Umbrella

 All Sync & Power leads, instructions, All in one kit bag
Guide Number 45-mtrs
135-ft		 Digital back meter readings click here
Fuse rating 6.3 amps
Recycle Time (100%)

230 volts, 1.5 seconds

110 volts, 2 seconds

Auto Power Dump Yes when flash output is lowered by 1/10th of f stop or more
Recycle confirm
Ready lamp & audio beep (switchable bleep)
Flash duration
1 ~ 3 m/secs
Output range
Full Power down to 1/8th power. (4 f-stops)
Modelling Lamp
60 Watt Halogen

Colour Temperature
5600k +/-200 K
Flash Triggering
Sync cable, IR-trigger, flash or test button.
User changeable flashtube
Yes
Trigger Voltage
5 volts
Pre-flash Program

For cameras with a pre-flash monitor program, can be set to sync with 1st,2nd or 3rd flash

"Top light on is the standard Sync setting"

Slave cell distance
10 meters (30 ft)
Working Voltage
EUR 230V/50Hz USA 110V/60Hz
Total size including
reflector & stand mount
275 L x 215 W x 265 H with reflector

Weight - Kg (lbs)
1230 KG (5lbs)
Correct @ June 2006 but subject to change
Accessories
  EX Accessories Guide to Home Studio    
Expanding your creativity with
t